(A) defective modem

(B) defective computer

(C) software bug

(D) bad phone line

(A) The red line in the cable goes to the highest pin number

(B) The colored line in the cable goes to pin #1

(C) It does not matter

(D) The blue or red line in the cable goes away from the power connector

(A) DOS=High

(B) devicehigh=

(C) loadhigh=

(D) DOS=UMB

(A) Erratic paper advancement

(B) Erratic ribbon advancement

(C) Misaligned print head

(D) Overheating print head

(A) 16

(B) 8

(C) 255

(D) 10

(A) cache

(B) video

(C) operation system

(D) com ports

(A) DMA

(B) CMOS

(C) the OS

(D) configuration software

(A) UPS

(B) Proper grounding

(C) Surge protector

(D) Nuclear powered thermal protective underwear

(A) Set the master-slave jumper to slave on the second drive

(B) Use the IDE configuration software to set the new drive as slave

(C) Verify that you define the new drive as D: in the CMOS setup

(D) Verity that you attach the drive to the connector at the end of the ribbon cable

(A) ready to start

(B) ready to switch

(C) request to send

(D) request to scan